The Beginners Guide To (Finding The Starting Point)

Standard Colors for Your Underground Utilities

Underground utilities can easily be identified today. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. Otherwise it can be something disastrous. If you hit any of the underground utility lines while digging then you can be fatally injured. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

Marking lines may lessen the risks but there are time when accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. Calling 811 is enough for the property owner to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.

Proposed excavation sites use white lines. Area that will be excavated in the future are marked.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. This color is appropriate for electrical works since it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.

If you want to learn more about utility lines click here now! Click here for more.